CENTRIFUGAL INDUSTRIAL FANS
From 221 mm to 2240 mm diameter impeller
Up to 20.000 Pa
Up to 300.000 cm/h
Up to 630 Kw
Up to 90% efficiency
AXIAL INDUSTRIAL FANS
From 180 mm to 2000 mm diameter impeller
Up to 1500 Pa
Up to 360.000 cm/h
Up to 220 Kw
Up to 90% efficiency
Industrial Fan / Industrial Blower: ART-VCM
Specifications: V = 0,1 ÷ 60 m3/s Pt = 1000 ÷ 20000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of dust laden air, with the exclusion of fibrous materials.
Impellers with backward curved blades.
Suitable for pneumatic conveyance of air, including sawdust and short wooden chips; it is characterized by an high efficiency.
Particularly used in drying systems, forced draughts, glassworks, mill and marble industries. This series is paritucaly suitable for the glassworks industry and used as combustion air and cooling fans for the furnace area, exhaust fans, recovery systems, and recirculation fans during the process of forming the glass as well as mold cooling and air staging. The furnace is required to be equipped with proper cooling and combustion equipment whilst exhausts and fresh air are necessary to provide for the comfort of operators. The process of glass production uses fans for tempering of glass. To complete a specific set of surface properties, it needs the high-temperature sheets of glass and metal to be exposed to high-velocity ambient air from glass blowers. During the part of a continuous operation, the air is typically filtered and directed onto the hot surface. There are numerous steps of air jets which are directed at the quenched surface as long as the requisite surface temperature is accomplished. As the air is a poor heat transfer medium, the air-quench tempering blowers can considerably demand the air and horsepower. Therefore, the highest efficiency metal or glass tempering blowers are applied for this application.
Industrial Fan / Industrial Blower : FA/R-FC-FE-FG/P
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration.
Industrial Fan / Industrial Blower : FC-FE-FG-FI-FP/N
Specifications: V = 0,02 ÷ 90 m3/s Pt = 1000 ÷ 25000 Pa
Industrial fan/ industrial blower: For the conveyance of clean of light dusty air. The impellers have backward curved blades with an high fluid dynamic efficiency at low noise level.
Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
Particularly used in installations for furnaces, foundries, glassworks, cement plants, cereal- based food production, but also mill and chemical industries as well as burners.
Industrial Fan / Industrial Blower : FQ
Specifications: V = 0,2 ÷ 60 m3/s Pt = 700 ÷ 8000 Pa
Industrial fan/ industrial blower: For the coveyance of clean of light dusty air. The impellers have backward curved blades with an high fluid dynamic efficiency at low noise level.
Suitable for all applications with medium-high capacity and medium-high pressure at the same time.
Particularly used in suction, flues extraction, drying systems and material conveyance on suction.
Ferrari Industrial fan FQ series are suitable for dedusting and filtering industry. With a full line of mechanical dust collectors and filter systems, Ferrari industrial filtering fans are designed for clean air to control and eliminate massive particle load from entering into the airstream. Ferrari Industrial dedusting fans are applied for exhausting clean filtered air out of the system whether there is sawdust, metal scraps, or welding smoke.
Industrial Fan / Industrial Blower : MEC
Specifications: V = 0,2 ÷ 60 m3/s Pt = 700 ÷ 5000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of dust laden air. Closed impellers with backward curved blades.
Suitable for all applications where the flow through the fan consists of solid material of small-medium dimensions, with the exclusion of fibrous materials.
Particularly used for the conveyance of sawdust, short wooden chips and plastic materials but also suction, fumes extraction, drying system and chemical plants.
Industrial Fan / Industrial Blower : FR
Specifications: V = 0,2 ÷ 100 m3/s Pt = 300 ÷ 3500 Pa
Industrial fan/ industrial blower: For the conveyance of clean of light dusty air. High efficiency impellers with backward curved blades. Suitable for high capacity at low pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, tanks with solvents. As roof fan it is used the TFR serie.
Industrial Fan / Industrial Blower : K-KA-KB-KC-KM
Specifications: V = 0,01 ÷ 15 m3/s Pt = 600 ÷ 18000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of really dusty air with high amont of solid particles suspended in the air. Open impellers with radial or forward blades.
Suitable for all applications where closed impellers tend to get clogged in the conveyance of fibrous materials.
Particularly used in textile industries, woodworks, tanneries, plastic materials processing, tobacco industries, foundries and paper mill. High pressure Ferrari textile fans are used for pneumatic transportation of bale, for waste recovery and provide safe working environment to workers. All mechanical parts and elements of this series are assembled in order to avoid any vibration. Ferrari Ventilation is one of the major textile industry fans manufacturers as Ferrari ventilation has more than 60 years experience in supplying textile pressure fans in traditional textile industry.
Industrial Fan / Industrial Blower : PFM-PFB
Specifications: V = 0,5 ÷ 40 m3/s Pt = 200 ÷ 5000 Pa
Industrial fan/ industrial blower: Plug fans are designed for use where a space saving is required.
In every application for moving large volumes of (proper or lightly dust laden) air with low pressure inside ovens, booths plenums.
This series of fans uses impellers with backward curved blades which have an high efficiency.
They are supplied without casing and provided on request of an insulated plug panel and cooling disk for use with hot air.
Industrial Fan / Industrial Blower : DFM
Specifications: V = 1,5 ÷ 550 m3/s Pt = 160 ÷ 8000 Pa
Industrial fan/ industrial blower: For the conveyance of clean or light dusty air.
The impellers are double inlet type, with high efficiency backward curved blades. Suitable for all applications with high capacity against medium-high pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, intake from textile sector plants.
Industrial Fan / Industrial Blower : DFR-CFR
Specifications: V = 0,8 ÷ 160 m3/s Pt = 300 ÷ 4000 Pa
Industrial fan/ industrial blower: For the conveyance of clean or light dusty air.
The impellers are double inlet type, with high efficiency backward curved blades. Suitable for all applications with very high capacity against low pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, tanks with solvents. For the suction of hot fluids it is used the CFR serie.